PERBEDAAN STRUKTUR MIKRO, KEKERASAN, DAN KETANGGUHAN BAJA HQ 705 BILA DIQUENCH DAN DITEMPER PADA MEDIA ES, AIR DAN OLI

Darmawi Bayin, M Amin Indra Putra

Abstract


This research is aim to analyze the effect of  quench at difference medium on the hardness and the impact of HQ 705 steel which is as similar as AISI 4340 with 0.38 – 0.43% C; 1.82% Ni; 0.5% - 0.8% Cr  and 0,25% Mo. HQ 705 steel is heated to austenite temperature of  8500C and hold as long as 15 minutes and cooled at the difference mediums, which is water, ice and oil. After that, the steels being tempered at temperature of 5500C and hold as long as 30 minutes, and then again cooled. Finally, the specimens are tested to find hardness, toughness and microstructure. Through this research, we find the increase of hardness, from 33.4 HRC at no treatment to 56 HRC at cooling in water, 40.3 HRC at cooling in oil.

Full Text:

PDF

Refbacks

  • There are currently no refbacks.



logo
Jurnal Rekayasa Mesin
Jurusan Teknik Mesin, Fakultas Teknik, Universitas Sriwijaya
Jl. Srijaya Negara, Bukit Besar, Palembang-Sumatera Selatan
E-mail : jrm@ft.unsri.ac.id
Website : https://ejournal.unsri.ac.id/index.php/jrm

http://ejournal.unsri.ac.id/public/site/images/amohruni/1374241399_issn_barcode_124

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.

Flag Counter

View My Stats