PENGEMBANGANA MEDIA PEMBELAJARAN ENERGI KINETIK BERBASIS MIKROKONTROLER ARDOUNO UNO
Abstract
This research is a development research to develop learning media based on the Arduino Uno microcontroller in kinetic energy subjects with the help of ultrasonic sensors and load cells that are feasible and effective. The test subjects in this research and development consisted of material experts, media experts, physics subject teachers, and 12th grade students of MAN 1 Pontianak. The ADDIE development model used in this study consisted of five stages, namely: (1) the analysis phase, (2) the design phase, (3) the development phase, (4) the implementation phase, and (5) the evaluation phase. The results of material expert validation with an average score of 85%, and media expert validation with an average score of 87% indicate that the material and tool design developed is very feasible. Then, the teacher's response to physics lessons obtained a score of 83%, with very good criteria. The average score of student responses was obtained by a score of 89%, with very good criteria, which means that the learning media based on the Arduino Uno microcontroller in kinetic energy subjects with the help of ultrasonic sensors and load cells developed is easy to use by teachers and students.
Keywords
Full Text:
PDFReferences
Casaburo, F. (2021). Teaching Physics by Arduino during COVID-19 Pandemic: The Free Falling Body Experiment. http://arxiv.org/abs/2105.03888
Dibarbora, C. (2021). Computational models and experimental validation at the physics teacher training college using scilab and arduino. Journal of Physics: Conference Series, 1882(1). https://doi.org/10.1088/1742-6596/1882/1/012139
H, N., Arnidah, A., & Hasfat, H. (2021). The Development Of Multimedia-Based Digital Simulation E-Book For Vocational Schools. Journal of Educational Science and Technology (EST), 7(1), 84. https://doi.org/10.26858/est.v7i1.19193
Herliandry, L. D., Nurhasanah, N., Suban, M. E., & Kuswanto, H. (2020). Pembelajaran Pada Masa Pandemi Covid-19. JTP - Jurnal Teknologi Pendidikan, 22(1), 65–70. https://doi.org/10.21009/jtp.v22i1.15286
Hikmah, N., Saridewi, N., & Agung, S. (2017). Penerapan Laboratorium Virtual untuk Meningkatkan Pemahaman Konsep Siswa. EduChemia (Jurnal Kimia Dan Pendidikan), 2(2), 186. https://doi.org/10.30870/educhemia.v2i2.1608
Indrasari, W., Rustana, C. E., & Zulfikar. (2021). Development a practicum tools to measure the speed of the air using Arduino Uno Microcontroller. Journal of Physics: Conference Series, 1816(1). https://doi.org/10.1088/1742-6596/1816/1/012109
Irawan, Y., Wahyuni, R., & Fonda, H. (2021). Folding Clothes Tool Using Arduino Uno Microcontroller And Gear Servo. Journal of Robotics and Control (JRC), 2(3), 170–174. https://doi.org/10.18196/jrc.2373
Kane, S. N., Mishra, A., & Dutta, A. K. (2016). Preface: International Conference on Recent Trends in Physics (ICRTP 2016). Journal of Physics: Conference Series, 755(1). https://doi.org/10.1088/1742-6596/755/1/011001
Matsun, M., Ramadhani, D., & Lestari, I. (2018). PENGEMBANGAN BAHAN AJAR LISTRIK MAGNET BERBASIS ANDROID DI PROGRAM STUDI PENDIDIKAN FISIKA IKIP PGRI PONTIANAK. Jurnal Pendidikan Matematika Dan IPA. https://doi.org/10.26418/jpmipa.v9i1.23703
Permatasari, A., Yuberti, Y., & Anggraini, W. (2019). Pengembangan Lampu Sensor Berbasis Arduino Uno Sebagai ALat Peraga Fisika. Indonesian Journal of Science and Mathematics Education, 2(3), 380–387. https://doi.org/10.24042/ijsme.v2i3.4364
Pfeiffer, S. (2017). The Vision of “Industrie 4.0” in the Making—a Case of Future Told, Tamed, and Traded. NanoEthics, 11(1), 107–121. https://doi.org/10.1007/s11569-016-0280-3
Prasetyo, H., & Sutopo, W. (2018). Industri 4.0: Telaah Klasifikasi Aspek Dan Arah Perkembangan Riset. J@ti Undip : Jurnal Teknik Industri, 13(1), 17. https://doi.org/10.14710/jati.13.1.17-26
Pratiwi, U., Al Haddar, G., & Kristiawan, M. (2020). Arduino-Based Mini Reed Switch Magnetic Sensor Media: Implementation in Physics Learning to Improve Students’ Analyzing Ability. Jurnal Iqra’ : Kajian Ilmu Pendidikan, 5(1), 183–193. https://doi.org/10.25217/ji.v5i1.773
Pusch, A., Ubben, M. S., Laumann, D., Heinicke, S., & Heusler, S. (2021). Real-time data acquisition using Arduino and phyphox: Measuring the electrical power of solar panels in contexts of exposure to light in physics classroom. Physics Education, 56(4). https://doi.org/10.1088/1361-6552/abe993
Putri, A. (2021). PENGEMBANGAN ALAT PRAKTIKUM MENGGUNAKAN SENSOR MEDIA BANTU PRAKTIKUM MATERI GELOMBANG Pendahuluan Pendidikan merupakan suatu aspek kehidupan yang sangat mendasar bagi pembangunan. 8(1), 1–13.
Sesa, E., Feriyono, A., Djamal, M., Musa, M. D. T., Ulum, M. S., & Farhamsa, D. (2020). The design and implementation of an instrument for converting angular velocity to linear velocity based on arduino atmega 2560. Journal of Physics: Conference Series, 1434(1). https://doi.org/10.1088/1742-6596/1434/1/012001
Straight, C., & Materials, M. (2021). DESIGN PHYSICS PROPS BASED ON ARDUINO NANO SENSORS ON IRREGULARLY. 5(1), 26–30.
Trainer, P., Mikrokontroler, P., Mikrokontroler, T., & Uno, A. (2021). ARDUINO UNO PADA MATA PELAJARAN TEKNIK PEMOGRAMAN MIKROPROSESOR DAN MIKROKONTROLER KELAS XI TEI DI SMKN 1 NGAWI Zainal Mujib Ansori S1 Pendidikan Teknik Elektro , Fakultas Teknik , Universitas Negeri Surabaya Lilik Anifah Jurusan Teknik Elektro , Fakultas.
DOI: https://doi.org/10.36706/jipf.v8i2.15633
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 Jurnal Inovasi dan Pembelajaran Fisika
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Ogan Ilir, Indonesia
Jurnal Inovasi dan Pembelajaran Fisika is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Indexed in:
Recommended Tools :
View My Stats